Examples of Audio Plugin Designs. Enquire for yours!

The following are examples of possible audio plugin dsp design implementations, shown here in mono, unless otherwise stated as stereo. The Core range represents the designs with fewest number of parameters. All plugins can be designed to include any number of parameters and processes.  They can be designed as mono only audio plugins, stereo or both.

Core Tier: Specs

Category 

Type

Parameters  

Utility Plugins (Core)

Gain

1

Enquire Now

The Gain plugin is a precise utility tool designed to adjust the volume level of an audio signal with accuracy and transparency. It enables users to increase or decrease gain (amplitude), either boosting quieter signals or attenuating louder ones, while preserving the original character of the audio. This control is crucial for consistent gain staging, ensuring balanced audio levels throughout the signal chain without adding coloration or unwanted effects. Built to the same high-quality standards as all our plugins, this specialized tool is essential for audio engineers who require reliable, clean control over volume adjustments. It includes the following parameters:

Gain: The primary parameter for adjusting the gain level, typically represented as dB or a percentage.

Category 

Type

Parameters

Utility Plugins (Core)

Pan 

1

Enquire Now

The Pan plugin is a precise utility designed for controlled stereo placement, allowing users to position an audio signal within the stereo field, from left to right or center. This tool is essential for creating spatial separation and clarity, giving each element in the mix its distinct place without altering its frequency content or dynamics. Built to high standards, this plugin provides reliable control for achieving a balanced and well-defined stereo image. It includes the following parameters:    

Pan: A single parameter that controls the stereo balance of the audio signal allowing the user to pan between left and right.       

Category 

Type

Parameters    

EQ Plugins (Core)

Single Band Graphic

2

Enquire Now

This plugin features a streamlined, single-band graphic EQ designed for focused, straightforward frequency adjustments. Ideal for targeting and fine-tuning a specific frequency area, this EQ offers precise tonal adjustments without the added complexity of multi-band control. Built to high standards, it provides an efficient solution for achieving clarity in the mix. It includes the following parameters:

Frequency: Sets the center frequency (in Hz) for the single band graphic, allowing the user to target a specific band of frequencies for boosting or cutting.

Gain: Adjusts the amount of boost or cut applied using a Bell filter, to the set frequency band with a fixed Q. The user can increase or decrease the level (in dB) shaping the tone of the sound within the specific frequency range. 

Category 

Type

Parameters

EQ Plugins (Core)

Notch 

2

Enquire Now

This plugin is engineered to professional standards for precise frequency attenuation, allowing users to effectively isolate and reduce specific problem frequencies with accuracy. Built for handling corrective and surgical EQ adjustments with precision, this high-quality notch filter provides fine control for removing unwanted resonances or tonal issues within a mix. It includes the following parameters:

Frequency: Sets the frequency (in Hz) where the notch filter is applied. This allows users to pinpoint and attenuate unwanted frequencies, such as hums or resonances. 

Q-Factor: Controls the width of the notch. Higher Q values create a narrow, precise cut, while lower Q values result in a broader attenuation range, providing flexibility in tuning the filters precision. 

Category 

Type

Parameters    

EQ Plugins (Core)

High Shelf 

2

Enquire Now

This plugin offers precision, high-frequency tone shaping, crafted to professional standards for enhancing or attenuating the upper frequency spectrum. Designed to adjust brightness and presence with accuracy, this high-shelf EQ allows for clear tonal adjustments, making it effective for adding clarity or reducing harshness as needed. It includes the following parameters:

Frequency: Sets the cutoff frequency (in Hz) where the high shelf effect begins allowing users to target the point above which frequencies are boosted or attenuated. 

Gain: Adjust the amount of boost or cut applied to the frequencies above the selected point, typically measured in dB.

Category 

Type

Parameters    

EQ Plugins (Core)

Low Shelf 

2

Enquire Now

This plugin provides high-quality, targeted control over low-end frequencies, engineered to enhance or reduce bass content with precision. Designed for impactful low-frequency shaping, this low-shelf EQ is effective in managing warmth and weight within a track, making it ideal for emphasizing bass presence or reducing unwanted rumble. It includes the following parameters:

Frequency: Sets the cutoff frequency (in Hz) where the low shelf effect begins, allowing users to control the point below which frequencies are boosted or attenuated. 

Gain: Adjusts the amount of boost or cut applied to frequencies below the selected point, typically measured in dB.

Category 

Type

Parameters    

EQ Plugins (Core)

High-Pass 

1

Enquire Now

This plugin delivers precise low-end control, effectively removing unwanted low-frequency content to clean up rumble or sub-bass frequencies. Engineered for professional clarity, this high-pass filter is a powerful tool for managing the low end in a mix, helping to clarify and balance audio without affecting higher frequencies. It includes the following parameters:

Cutoff Frequency: Sets the point (in Hz) where the high-pass filter begins attenuating lower frequencies. This parameter allows users to remove unwanted low-end content, effectively cleaning up the audio and focusing on the higher frequency ranges. 

Category 

Type

Parameters    

EQ Plugins (Core)

Low-Pass 

1

Enquire Now

This plugin delivers precise control over high-frequency content, designed to reduce harshness or unwanted noise in the upper frequency range. Built to professional standards, this low-pass filter effectively manages high frequencies, making it ideal for reducing hiss, softening a track´s brightness, or creating a warmer sound signature. It includes the following parameters:

Cutoff Frequency: Sets the point (in Hz) where the low-pass filter starts attenuating higher frequencies. This parameter allows the user to remove harsh or excessive high-end content, effectively smoothing out the audio.

Category 

Type

Parameters    

EQ Plugins (Core)

Bell 

3

Enquire Now

This plugin enables precise tonal adjustment across specific frequency areas in the spectrum, offering a high-quality solution for focused tonal corrections and enhancements. Built for accurate frequency sculpting, this bell EQ is an essential tool for nuanced mixing and tonal adjustments, giving users the flexibility needed for professional results. It includes the following parameters:

Frequency: Sets the center frequency (in Hz) for the bell-shaped curve where the boost or cut is applied allowing the user to focus on a particular area of the frequency spectrum. 

Gain: Adjusts the amount of boost or cut applied at the center frequency typically measured in dB. 

Q-Factor: Controls the bandwidth of the affected frequency range. A higher Q narrows the range, making the adjustment more precise, while a lower Q broadens it. 

Category 

Type

Parameters    

Filter Plugins (Core)

High-Pass

1

Enquire Now

This plugin delivers precise low-end control, effectively removing unwanted low-frequency content to clean up rumble or sub-bass frequencies. Engineered for professional clarity, this high-pass filter is a powerful tool for managing the low end in a mix, helping to clarify and balance audio without affecting higher frequencies. It includes the following parameters:

Cutoff Frequency: Sets the point (in Hz) where the high-pass filter begins attenuating lower frequencies. This parameter allows users to remove unwanted low-end content, effectively cleaning up the audio and focusing on the higher frequency ranges. 

Category 

Type

Parameters    

Filter Plugins (Core)

Low-Pass

1

Enquire Now

This plugin delivers precise control over high-frequency content, designed to reduce harshness or unwanted noise in the upper frequency range. Built to professional standards, this low-pass filter effectively manages high frequencies, making it ideal for reducing hiss, softening a track´s brightness, or creating a warmer sound signature. It includes the following parameters:

Cutoff Frequency: Sets the point (in Hz) where the low-pass filter starts attenuating higher frequencies. This parameter allows the user to remove harsh or excessive high-end content, effectively smoothing out the audio. 

Category 

Type

Parameters    

Filter Plugins (Core)

Band-Pass

2

Enquire Now

This plugin is built for precise control within a specific frequency range, allowing users to isolate, enhance, or attenuate selected portions of the audio spectrum with accuracy. This band-pass filter is ideal for focused tonal adjustments, such as emphasizing specific frequencies for effect or removing unwanted sounds outside a defined range, making it versatile for both creative and corrective tasks. It includes the following parameters:

Center Frequency: Sets the central frequency point (in Hz) where the band-pass characteristics allow only frequencies around this point to pass through, making it suitable for targeting a specific frequency range. 

Q-Factor: Controls the width of the band that is allowed to pass. A higher Q value narrows the bandwidth, making the filter more precise, while a lower Q broadens the bandwidth, affecting a wider range of frequencies. 

Category 

Type

Parameters    

Time-Based Effect Plugins (Core)

Delay 

3

Enquire Now

This high-quality delay plugin generates controlled echoes or repetitions by applying a specified delay to the audio signal. Essential for creating rhythmic patterns, spatial depth, and adding dimension to tracks or the overall mix, it offers precise control for shaping delay effects tailored to each project’s needs. It includes the following parameters:

Delay Time: Sets the delay duration (usually in milliseconds or as a synced note value if tempo-synced). 

Feedback: Controls the amount of delayed signal fed back into the delay line, affecting the number of repeats. 

Mix (Dry/Wet): Adjusts the balance between the original (dry) signal and delayed (wet) signal. 

Category 

Type

Parameters    

Time-Based Effect Plugins (Core)

Reverb 

3

Enquire Now

This high-quality reverb plugin enriches spatial dimensions and introduces natural ambience to audio tracks. With essential reverb controls, it provides an effective way to shape the sense of space and depth in a mix, making it valuable for adding realistic or creative spatial effects as needed. It includes the following parameters:

Room Size: Controls the perceived size of the simulated space, ranging from small rooms to large halls. This parameter shapes the overall character and length of the reverb tail. 

Damping: Controls the amount of high-frequency absorption, allowing for brighter or darker reverb tones. 

Mix (Dry/Wet): Adjusts the balance between the original (dry) signal and reverb-processed (wet) signal for the desired blend in the mix. 

Enquiry Form
Either select the plugin type via this form and send for quote, or if you have an idea for an audio plugin already that you need development for, you can get in touch using this contact form, by providing a quick summary of the idea, e.g. an audio plugin that can do...etc. Once your enquiry is received, we can discuss the outline of the idea and a quote can be provided.
0
    0
    Your Cart
    Your cart is empty
    Continue Shopping